Incoloy 800HT (UNS N08811) Seamless Pipes & Tubes Manufacturer & Supplier

Alloy 800HT (Incoloy 800HT, UNS N08811) is an enhanced version of Alloy 800 with controlled carbon (0.06-0.10%) and higher combined Al+Ti content (0.85-1.20%). These controlled additions provide significantly higher creep-rupture strength, making it the premier choice for high-temperature furnace applications.

UNS: N08811 | Category: Nickel-Iron-Chromium Alloy | Werkstoff Nr: 1.4876 | EN Name: X10NiCrAlTi32-20

Size Range

Outer Diameter: 1/4" NPS to 10" NPS (6.35mm to 273.1mm OD)

Wall Thickness: SCH 5S to SCH 80S

Chemical Composition (%)

NiCrFeCAlTiAl+TiMnSi
30.0-35.019.0-23.039.5 min0.06-0.100.25-0.600.25-0.600.85-1.201.50 max1.00 max

Mechanical Properties

Tensile Strength
520 MPa min
Yield Strength
205 MPa min
Elongation
30% min
Hardness
N/A

Physical Properties

Density
7.94 g/cm3
Melting Range
1357-1385 C
Thermal Conductivity
11.5 W/m-K
Electrical Resistivity
989 nOhm-m
Specific Heat
460 J/kg-K
Coeff. of Thermal Expansion
14.4 um/m-C

Corrosion Resistance

Pitting Resistance (PREN)
N/A
Max Service Temp (Oxidizing)
900 C (continuous)
Intergranular Corrosion
Good
Stress Corrosion Cracking
Good
General Corrosion Rate
Excellent in carburizing environments
Seawater Resistance
Good

Applicable Standards

Applications

Industries Served

Key Advantages

Equivalent Grades

ASTM
N08811
Trade
Incoloy 800HT
DIN
1.4876 (H/HT)

Frequently Asked Questions

What is the chemical composition of Alloy 800HT?

Alloy 800HT contains Ni 30.0-35.0, Cr 19.0-23.0, Fe 39.5 min, C 0.06-0.10, Al 0.25-0.60, Ti 0.25-0.60, Al+Ti 0.85-1.20, Mn 1.50 max, Si 1.00 max (weight %).

What are the mechanical properties of Alloy 800HT?

Tensile Strength: 520 MPa min; Yield Strength: 205 MPa min; Elongation: 30% min; Hardness: N/A.

What are the equivalent grades of Alloy 800HT?

Nearest equivalents of Alloy 800HT: N08811 (ASTM), Incoloy 800HT (Trade), 1.4876 (H/HT) (DIN). Equivalents are close matches, not identical; confirm against the governing standard.

Which standards does Stancor Group supply Alloy 800HT to?

Alloy 800HT is supplied to ASTM B407 / ASME SB407, ASTM B163 / ASME SB163, ASTM B514 / ASME SB514 and DIN 17751.

What sizes of Alloy 800HT are available?

1/4" NPS to 10" NPS (6.35mm to 273.1mm OD).

What is Alloy 800HT used for?

Alloy 800HT is used for Ethylene pyrolysis furnace tubes, Reformer tubes in hydrogen plants, Industrial furnace components, Radiant tubes and muffles, Power plant superheaters and Ammonia reformer tubes.